1_concrete-crack

Crack Injection / Concrete Repair

When a structure settles, or suffers overload, cracks form in foundations and concrete walls. At this point, it is important to repair these minor cracks in the concrete before these problems expand and demand an extremely expensive solution in structural repair. Crack injection has been an accepted method of repairing foundation cracks for years, because it is cost-effective, reliable, and permanent. Mar-flex offers many concrete repair products, made from epoxy which are superior to other crack injection products because the epoxy injections adhere to the concrete, allowing for further expansion and contraction, while stopping water from eroding the concrete any further, and maintaining the seal.

See our YouTube Channel For Instructional Videos.

Comments are closed.

Single Use Crack Repair Kit
Single Use Crack Spec Sheet   Product Page

The kit includes the materials and accessories for low-pressure injection and repair of approximately 8-10 lineal feet. Contains the following; (1 jar 8oz.) Mar-flex Crack Seal (1 jar 8oz.) Port Adhesive (2) Wooden Sticks (12) Surface Ports and Caps (2 Cartridges) Mar-flex Injection Polyurethane/Epoxy Resin 1:1 (2) 3/8" :24 Mixing Nozzles (1) Injection Hose Assembly with plastic shut-off valve (2 pair) Latex Gloves (1) Plastic Trowel (1) Wire Brush (1) Drop Cloth (1) Complete Instructional DVD Tool Required: Standard Caulki...

Read More on Single Use Crack Repair Kit >>

Staple Kit
Staple Kit Spec Sheet   Product Page

Staple Kit for Structural Crack Repair. Structural cracks in concrete are caused by movement in the foundation, resulting in long-term moving and fatiguing of concrete. Horizontal cracks, or cracks wider than a quarter of an inch are general signs of a structural crack. Because the crack was initially caused by stress resulting from movement of the foundation, epoxy will not prevent further foundation cracking. The use of carbon staples provide the necessary reinforcement. By cross-stitching the countersunk staples within the foundati...

Read More on Staple Kit >>

Anchoring Epoxy
Anchor Epoxy Spec Sheet   Product Page

Anchoring Epoxy by Mar-flex High strength, fast setting, 2-component anchoring epoxy adhesive. 100% solids. Ideal for anchoring bolts, dowels and reinforcing rebar in concrete. 12 (1:1 cartridge)/ box 12 static mixing nozzles and retaining nuts included. Product Number IA-68170 Call Us Today (800) 498-1411 or send us an email....

Read More on Anchoring Epoxy >>

Low Viscosity Crack Filler
Low Viscosity Crack Filler Spec Sheet   Product Page

Low viscosity & moisture insensitivity make this an excellent product for the injection of dry or damp cracks. With a 200 cps it is designed for cracks that are hairline and larger. 8 (2:1 cartridges)/box Mixing nozzle IA-68190, and retaining nut IA-68210 recommended. Product Number IA-68140 Call Us Today (800) 498-1411 or send us an email....

Read More on Low Viscosity Crack Filler >>

Seal & Peel
Seal and Peal Spec Sheet   Product Page

Quick Set Surface Seal & Peel is a two component, solvent free, paste adhesive. It is used as a fast-curing removable surface sealer and to attach ports in epoxy and urethane foam crack repair. Cured product does not require sanding or grinding for removal from the wall. 6 (1:1 cartridges) /box Mixing nozzle IA-68180, & retaining nut IA-68210 recommended. Product number IA-68165 Call Us Today (800) 498-1411 or send us an email....

Read More on Seal & Peel >>

Surface Port Paste
Port Paste Spec Sheet   Product Page

Quick Set Surface Port Paste is a 2 component smooth epoxy adhesive designed to seal the surface of a crack and to attach ports to masonry surfaces. 6 (1:1 cartridges) /box Mixing nozzle IA-68180, and retaining nut IA-68210 recommended. Product Number IA-68160 Call Us Today at (800) 498-1411 or send us an email....

Read More on Surface Port Paste >>

Quick Foam Broad
Quick Foam Broad Spec Sheet   Product Page

Urethane Quick Foam Broad is a hydrophobic polyurethane liquid with a 100 cps. Designed for water infiltration or ex-filtration. The dual cartridge comes with one side empty. Water is placed in the empty side and then when mixed with water, the product reacts within 30 seconds, creating a closed cell-barrier that prevents water infiltration. Best suited for cracks that are 1/8" or wider which are actively leaking. 6 (1:0 cartridges) /box Mixing nozzle IA-68180, and retaining nut IA-68210 recommended. Product Number IA-68120 Call Us T...

Read More on Quick Foam Broad >>

Quick Foam Fine
QFoam_Fine Spec Sheet   Product Page

Urethane Quick Foam Fine is a hydrophobic polyurethane liquid with a 600 cps. Designed for water infiltration or ex-filtration. Cartridges contain product and catalyst that once introduced to water, reacts forming a closed cell barrier that prevents water infiltration. Designed to be used on cracks that are hairline and larger. 6 (1:0 cartridges) /box Mixing nozzle IA-68180, and retaining nut IA-68210 recommended. Product Number IA-68100 Call Us Today at (800) 498-1411 or send us an email....

Read More on Quick Foam Fine >>