Moisture Block 361 Prod Data
Dampproofing SB is a heavy-bodied cutback asphalt emulsion protective coating used when dampproofing is required. It forms a smooth, tough, almost rubber-like film when dry. Mar-flex Cavity Wall & Foundation Coating has moderately good resistance to temperature changes, is flexible at low temperatures, has excellent weatherability and resists water penetration. The durable film bonds to most clean, dry and firm surfaces. All surfaces to be coated must be clean, dry, sound; free from oil, grease, rust, scale, loose paint and dirt. Mar-flex Cavity Wall & Foundation Coating is compatible with Mar-flex Drainage and Insulation Boards.
Uses
Mar-flex Cavity Wall & Foundation Coating is recommended for dampproofing below-grade, vertical basement walls of poured concrete or unit masonry construction. It serves as a vapor barrier on the exterior face of the interior wall of above-grade exterior masonry cavity walls. It also excels as a utility coating on posts, pilings and other metal surfaces set into ground.
Application
Application will depend on condition and porosity of surface to be coated. Dampproofing applications should be made at a rate of approximately 2 gallons/100 ft. This product should be applied as received. Keep container covered when not in use. Material should be spray applied with Mar-flex Spray Unit or similar suitable air-less spray equipment. Application may also be accomplished manually with a brush or roller. See installation instructions for complete details.
Code Compliance
Mar-flex Cavity Wall & Foundation Coating complies with ASTM D 1227-95, Type 2, Class 1 and ASTM D 1187, Type 1.
Product Number
BGD-36115 | 55 Gallon Drum Each or 4/Pallet
BGD-36118 | 6,000 Gallon Bulk
Call Us Today at (800) 498-1411 or send us an email.
