| Basement Dampproofing |
 |
Mar-flex offers dampproofing that serves as both an above-grade vapor retardant and a below-grade dampproofing product. It is available in solvent based and water based.
 |
|
|
|
|
Mar-flex Cavity Wall & Foundation Coating is recommended for dampproofing below-grade, vertical basement walls of poured concrete or unit masonry construction. It also serves as a vapor retarder on the exterior face of interior walls of above-grade exterior masonry cavity walls. In addition, it excels as a utility coating on posts, pilings and other metal surfaces set into the ground.
 |
|
|
|
|
Product Showcase |
|
|
|
Mar-flex Cavity Wall & Foundation Coating is a heavy-bodied cutback asphalt protective coating used when dampproofing is required. It forms a smooth, tough, almost rubber-like film when dry and has moderately good resistance to temperature changes, has excellent weatherability, resists water penetration and is compatible with Mar-flex Drainage and Insulation Boards. Available in a 55 gallon drum and bulk.
|
|
BGD-36115
BGD-36118
6,000 Gallon Bulk |
|
|
|
|
|
|
| Mar-flex Cavity Wall & Foundation WB Coating is a heavy-bodied cutback asphalt protective coating used when dampproofing is required. It forms a smooth, tough, almost rubber-like film when dry and has moderately good resistance to temperature changes, has excellent weatherability, resists water penetration and is compatible with Mar-flex Drainage and Insulation Boards. Available in 5 gallon bucket, 55 gallon drum, 330 gallon tote and bulk. |
|
BGD-36120 & BGD-36125
BGD-36123
BGD-36129
6,000 Gallon Bulk |
| |
|
|
|
|
|
|
