|
 |
Mixers, ports, mounts, plugs, caps and more – Mar-flex has all the materials needed for safe, secure injection and anchoring.
 |
|
|
|
|
Product Showcase |
|
|
|
Designed for use with cartridge systems and recommended for use with Quick Foam Fine IA-68100, Quick Foam Broad IA-68120 and Quick Set Surface Port Paste IA-68160. 24 per box.
|
|
IA-68180 |
|
|
|
|
|
|
Designed for use with cartridge systems and recommended for use with Low Viscosity Epoxy Crack Filler IA-68140. 24 per box.
|
|
IA-68190 |
|
|
|
|
|
|
| Threaded nuts to hold mixing nozzle onto dual cartridge during crack injection process. 10 per bag. |
|
IA-68210 |
|
|
|
|
|
|
| For hard-to-reach injection ports. One end connects to mixing nozzle, the other attaches to the port. Can be used with either epoxy or urethane materials. 10 per box. |
|
IA-68220 |
|
|
|
|
|
|
| Designed for use on hairline and actively leaking cracks. Suitable for use with Static Mixers. Length is 3-3/4". Requires a 5/8" diameter drilled hole. 100 per bag. |
|
IA-68230 |
|
|
|
|
|
|
| Designed for surface mounted low-pressure crack injection. Surface port suitable for both epoxy and urethane materials, flush mounted to flat masonry surfaces. 250 per box. |
|
IA-68280 |
|
|
|
|
|
|
| Designed for corner surface mounted low-pressure crack injection. Corner port suitable for both epoxy and urethane materials. Mounts in the corner of masonry surfaces. 250 per box. |
|
IA-68285 |
|
|
|
|
|
|
| Designed for surface mounted crack injection. Can withstand injection pressure up to 1000 psi. Requires Quick Lock Caps and Quick Lock Braces; sold separately. 250 per bag. |
|
IA-68400 |
|
|
|
|
|
|
| Designed for low-pressure and high-pressure crack injection. Can withstand injection pressure up to 1000 psi. Requires a 1/2" drilled hole, Quick Lock Caps and Quick Lock Braces; sold separately. 250 per bag. |
|
IA-68415 |
|
|
|
|
|
|
| To be placed on the ends of Quick Lock Ports. Designed to temporarily stop back-flow of material until injection is completed and ports have been crimped. Use in conjunction with Quick Lock Surface Ports. 250 per bag. |
|
IA-68425 |
|
|
|
|
|
|
| Crimpable metal bands designed to permanently crimp Quick Lock Ports to prevent back-flow of injection product. Use in conjunction with Quick Lock Surface Ports. 250 per bag. |
|
IA-68430 |
| |
|
|
|
|
|
