|
 |
From replacing equipment to protecting it, Mar-flex offers Spray Accessories that make dampproofing and waterproofing jobs easier on you – and your equipment.
 |
|
|
|
|
Product Showcase |
|
|
|
Standard size, contractor grade, airless, stainless steel spray gun. Lightweight with three position trigger lock and working pressure of 5,000 psi.
|
|
SA-08020 |
|
|
|
|
|
|
| S5 stainless steel spray gun, assembled with all fittings required to connect to a HotShot or WaterHog Spray Unit. Reverse-A-CleanTM housing and tip not included. |
|
SA-08025 |
|
|
|
|
|
|
| Custom applicator wand designed for ease of application of waterproofing products. High-pressure wand with ball valve release. Accepts a variety of tips for different viscosity materials. Made to use with Reverse-A-Clean™ Housing and Tip. |
|
SA-08050 |
|
|
|
|
|
|
| Replacement tube for 86" High-pressure Spray Wand kit. |
|
SA-08055 |
|
|
|
|
|
|
| An industry standard, extension designed to be used in conjunction with spray guns and Reverse-A-Clean™ Housing and Tips. |
|
SA-08060 |
|
|
|
|
|
|
| An industry standard, extension designed to be used in conjunction with spray guns and Reverse-A-Clean™ Housing and Tips. |
|
SA-08070 |
|
|
|
|
|
|
| An industry standard, extension designed to be used in conjunction with spray guns and Reverse-A-Clean™ Housing and Tips. |
|
SA-08080 |
|
|
|
|
|
|
Used on the 40" & 60" Wand Extensions and 86" High-pressure Spray Wand. Allows for 180° travel of spray tip, use in conjunction with Reverse-A-Clean™ Housing and Tip.
|
|
SA-08085
|
|
|
|
|
|
|
Heavy-duty airless spray tip housing assembly. Fits standard Reverse-A-Clean™ Tips and standard spray gun fittings.
|
|
SA-08090 |
|
|
|
|
|
|
| When placed in Reverse-A-Clean™ Housing, prevents leaks between spray gun and Reverse-A-Clean™ Housing. 10 per pack. |
|
SA-08095 |
|
|
|
|
|
|
The first number indicates the pattern width. This number is then doubled, indicating the width of the spray pattern when held 12" away from wall. The second set of numbers indicates the orifice diameter. This number determines the rate of atomization, which can affect drying times and coverage rates.
SA-08147-GHD Reverse-A-Clean™ Tip #635
SA-08120-GHD Reverse-A-Clean™ Tip #735
SA-08100-GHD Reverse-A-Clean™ Tip #727
SA-08110-GHD Reverse-A-Clean™ Tip #731
Solvent-Based Tip Recommendations:
Tip #635, #735 – Mar-flex 5000 or Quick Seal
Tip #727, #731 – Mar-flex Cavity Wall & Foundation Coating |
|
SA-08147, SA-08120, SA-08100,
SA-08110 |
|
|
|
|
|
|
The first number indicates the pattern width. This number is then doubled, indicating the width of the spray pattern when held 12" away from wall. The second set of numbers indicates the orifice diameter. This number determines the rate of atomization, which can affect drying times and coverage rates.
SA-08148-GHD Reverse-A-Clean™ Tip #639
SA-08131-GHD Reverse-A-Clean™ Tip #739
SA-08100-GHD Reverse-A-Clean™ Tip #727
SA-08110-GHD Reverse-A-Clean™ Tip #731
Water-Based Tip Recommendations:
Tip #639, #739 – Mar-flex 5000 WB or Quick Seal WB
Tip #727, #731 – Mar-flex Cavity Wall & Foundation WB Coating |
|
SA-08148, SA-08131, SA-08100,
SA-08110 |
|
|
|
|
|
|
| For use with standard spray gun, to prevent leaks and provide positive seal. 25 per pack. |
|
SA-08180 |
|
|
|
|
|
|
| Goes between the spray gun and the wand extension on the female end. |
|
SA-08183 |
|
|
|
|
|
|
Designed for convenience and comfort of applicator. Alleviates kinks in hoses. Female end fits standard spray gun.
|
|
SA-08300
|
|
|
|
| |
|
|
Designed for ease of application and comfort of applicator’s wrist and arms. Alleviates kinks in hoses by rotating 360° both horizontally and vertically.
|
|
SA-08310 |
|
|
|
|
|
|
| 7/8" thread. Used to convert the 86" Spray Wand for use with a Reverse-A-Clean™ Housing and Tip. |
|
SA-08320 |
|
|
|
|
|
|
| 3/8" female pipe thread. |
|
SA-08340 |
| |
|
|
|
|
|
|
|
|
| 3/8" inside diameter by 25' high-pressure airless hose with 1/2" male JIC to 3/8" male pipe. |
|
SA-08400 |
|
|
|
|
|
|
3/8" inside diameter by 25' high-pressure airless hose with 1/2" male JIC to 3/8" male pipe, insulation and protective abrasion sleeve. Designed for use with Pro, HotShot, WaterHog and WaterKat spray units.
|
|
SA-08410 |
|
|
|
|
|
|
| 3/8" inside diameter by 25' 5,000 psi airless hose with 1/2" male JIC to 1/2" male pipe, insulation and protection abrasion sleeve. Designed for use with the Pro Plus Spray Unit or Hydra-M 4000. |
|
SA-08415 |
|
|
|
|
|
|
3/8" inside diameter by 50' high-pressure airless extension hose with 3/8" male and female quick disconnects.
|
|
SA-08420
|
|
|
|
|
|
|
3/8" inside diameter by 50' high-pressure airless extension hose with 3/8" male and female quick disconnects, insulation and protective abrasion sleeve.
|
|
SA-08430 |
|
|
|
|
|
|
| 1/2" inside diameter by 125' high-pressure airless hose with 1/2" male pipe to 1/2" female JIC. |
|
SA-08440 |
|
|
|
|
|
|
| 1/2" inside diameter by 125' high-pressure airless hose with 1/2" male pipe to 1/2" female JIC, insulation and protective abrasion sleeve. Designed for use with Pro, HotShot, WaterHog and WaterKat spray units. |
|
SA-08450 |
|
|
|
|
|
|
| 1/2" inside diameter by 125' 5,000 psi airless hose with 1/2" male pipe to 1/2" female JIC, insulation and protective abrasion sleeve. Designed for use with the Pro Plus Spray Unit or Hydra-M 4000. |
|
SA-08455 |
|
|
|
|
|
|
| 150' of hose insulation. Helps maintain proper temperature of product. Fits all of spray hoses available from Mar-flex, use in conjunction with abrasion sleeve. |
|
SA-08460 |
|
|
|
|
|
|
| 250' of abrasion sleeve. Use in conjunction with hose insulation, protects hose from job site damage. |
|
SA-08470 |
|
|
|
|
|
|
To be used in conjunction with Quick Disconnect Male.
3/8" SA-08500
1/2" SA-08514
3/4" SA-08520
|
|
SA-08500, SA-08514, SA-08520
|
|
|
|
|
|
|
To be used in conjunction with Quick Disconnect Female.
3/8" SA-08510
1/2" SA-08518
3/4" SA-08530
|
|
SA-08510, SA-08518, SA-08530 |
|
|
|
|
|
|
Connects spray gun swivel to standard spray gun.
1/4" Female JIC to 3/8" Male Pipe SA-08550
1/4" Female JIC to 1/2" Male Pipe SA-08552 |
|
SA-08550, SA-08552 |
|
|
|
|
|
|
| Connects 3/8" Quick Disconnect Male to 3/8" ball valve. |
|
SA-08555 |
|
|
|
|
|
|
| Connects 1/4" end of 86" Spray Wand to 3/8" ball valve. |
|
SA-08565 |
| |
|
|
|
|
|
